Circuit Control Board Replacement 48v DPI Battery Charger Pre-2007 with AC Relay
This Circuit Control Board Replacement 48v DPI Battery Charger Pre-2007 with AC Relay is designed to operate and replace the control board (PCB) on any DPI 48-volt, 17-amp golf cart chargers manufactured prior to 2007 . Any Yamaha battery chargers or other DPI golf cart chargers with an AC disconnect relay control. This kit comes complete with PCB, pre-attached heat sink, and screws. Charge mode preset for Trojan battery types. Combines part numbers KITS0006 and KITS0008 to include A.C. relay. LED’s are surface mounted and do not extend off the edge. One-year warranty from date of shipment.
- Compatibility: 48-volt pre-2007 DPI/Yamaha battery chargers/golf cart chargers with an AC disconnect relay control. Replaces PCB identified with ‘PCB007-Rev.16’ marking.
- Input: N/A
- Output: 48V/17A DC
- Output Connector: N/A
- Read-Outs: LED, extended from edge of board to protrude through enclosure
- Input Cable Length: N/A
- Output Cable Length: N/A
PLEASE READ AND FOLLOW ALL INSTALLATION INSTRUCTIONS!
If you have any questions about this product or anything related to your golf cart needs feel free to contact us directly at (772) 247-GOLF (4653). Pete’s friendly staff is always standing by to help you.
- LED’s are surface mounted and do not extend off the edge
- Charge Mode Preset to Trojan Battery Type mode
- Heat sink and screws included