36 Volt 200 Amp Golf Cart Pre-Charge Resistor for Solenoid

$ 34.63

This 36 Volt  200 Amp Golf Cart Pre-Charge Resistor for Club Car, E-Z-GO, and Yamaha is designed to maintain the capacitors within the controller at the battery pack voltage so that when the solenoid contacts touch, no arcing occurs. If you are installing a high performance motor you will need a high amp solenoid to get the power to that motor. Then you will need a pre-charge resistor and diode.

 

Frequently Bought Together

36/48 Volt Golf Cart Diode (1 Amp) for use with 200 Amp Solenoid

This 36/48 Volt, 1 Amp Golf Cart  Pre-Charge Diode is designed to maintain the capacitors within your controller at battery pack voltage so that when the solenoid contacts touch, no arcing occurs. If you are installing a high performance motor you will need a high amp solenoid to get the power to that motor. With that solenoid you will need a pre-charge resistor and Diode.

Description

36 Volt  200 Amp Golf Cart  Pre-Charge Resistor

This listing is for one 36 Volt 200 Amp Golf Cart Pre-Charge Resistor. A resistor will keep the solenoid in good working order. This type of resistor is placed across the large power terminals of your solenoid. It pre-charges the filter capacitors in your electronic speed controller which will minimize the voltage surge across the contacts on your high amp solenoid. This reduces arcing off the contacts which minimizes pitting as they close. Plain copper contacts experience the worst pitting and wear because they cannot tolerate peak currents.  Excessive pitting over time causes the contacts to weld together or not make a good contact.

Additional Notes: You cannot install it the wrong way. Either side ring terminal will attach to either terminal. The pre-charge circuit will draw little to no power. Resistor value is determined by battery pack voltage. Diode attaches to small terminals; silver stripe on diode will go towards positive side.

Every solenoid needs a resistor and diode to function properly. You can purchase the corresponding diode for this resistor here.

Applications: ALL 36 Volt Golf Carts. Club Car, EZGO and Yamaha
Should you have any questions about whether or not sure this Golf Cart High Amp Solenoid will work with your application, please feel free to contact us at 888-531-7383. Pete’s Team is always standing by to help you! 

 

Additional information

Weight 0.1 lbs
Dimensions 6.5 × 0.5 × 0.3 in

You may also like…