Yamaha G22 Golf Cart Electric Motor Kit High Speed Regen 48v
This Golf Cart High Speed Motor Kit is designed for 48 volt Yamaha (G22) carts with Regen motor. If you are looking for MORE performance and more speed this is the kit! This package will provide approx 10% more Torque than the stock golf cart and will hit top speeds of around 23-25 mph depending on tire/wheel size and pressures being used. This set up is ideal for street carts flat terrain and pavement pounding. The Yamaha Drive 48v Electric Golf Cart Motor fits on the G29/Drive 19 tooth Differential Spline. Includes Golf Cart Motor (PGC-170-500-0001), XCT-48500 Alltrax Controller (500 Amp Programmable), Complete Wire Kit & Solenoid Kit (includes resistor, diode, mounting brackets, and hardware).
Please specify what type of cart you have and battery configuration so we we can ship the proper wire kit based on the number of batteries.
All Of Pete’s high performance motors are Made in the USA! Better quality and performance then all others. More copper and more steel mean more power…. This allows for greater current flow and better thermal capabilities. Less current draw equates to better efficiency and that equals longer run time or greater vehicle range. 180 °C Thermal Rating (Class H) This high performance golf cart motor meets or exceeds the Class H thermal rating specifications. Can be used in 36 or 48v applications – Though note higher operating voltage will equate to more motive power… 30 Years Golf Cart Motor manufacturing experience with a product defect rate of less than 1%.
Please Note – THIS MOTOR COMBO IS NOT FOR ANY SERIES MODELS !!! To Confirm this is the Best Setup for your application and performance requirements give us a call or go to our – Choosing A Golf Cart Motor Tool. This combo kit can be used in Yamaha G19 model if you use proper adapter for controller and will need different cable kit. Please call or leave order notes!
This Golf Cart High Speed and Torque Motor Kit Includes the following:
- High Speed Regen Motor
- 500 Amp Regen Motor Controller
- Curtis 500 Amp Solenoid
- Solenoid Diode and Resistor
- 4 AWG Copper Strand Cable Kit (Batteries, Controller, Motor)
- Easy install with NO golf cart controller programming.
- Approx Vehicle Speed : 23-25 MPH
- Performance – Speed and Torque
- Speed Enhancement : 80 %
- Torque Enhancement : 10 %
- Motor RPM : 5300
- Peak HP : 7
The Small Print – Not So Small –
Golf Cart performance specs are compared to the standard factory performance. Several factors can effect the performance. Some are battery conditions; tire size, tread type and air pressure; and varying environmental conditions. Standard factory speeds normally run between 12-14 MPH. This information is based on a standard factory gear ratio and no trailer hitch being present on the cart.
Any change in gear ratio or addition of a trailer hitch will void any liability or warranty from manufacturer unless authorized or confirmed prior to purchase. If you do not know what you need but know what you want call us today and we will help make sure you order the correct set up for your needs.
Please feel free to contact us at (772) 247-GOLF or drop us a line at email@example.com should you have any questions. Pete’s Team is always standing by to help you! Please call direct 772-247-4653 if you are having technical problems placing your order.