Description
Rugged Running Boards for the Early Club Car DS
The SGC NBDS02 Nerf Bar Kit gives an early Club Car DS a more substantial, utility-inspired appearance while adding a stepping surface on both sides of the cart.
These are more than decorative side tubes. Each nerf bar includes a wide perforated steel plate that functions as a running-board step. The openings provide additional surface texture and allow water, dirt and loose debris to pass through rather than collecting on a completely solid platform.
Their black powder-coated finish coordinates especially well with black roofs, wheels, rear seats, floor coverings and other dark accessories. The tubular design is also a natural visual match for lifted carts, hunting builds, campground cruisers and utility vehicles.
Extra-Thick Steel Construction
Steeleng manufactures the NBDS02 kit from extra-thick steel with a black powder-coated finish.
The complete assembly combines tubular outer rails, perforated step plates and vehicle-specific mounting structures. Steeleng identifies the design as U.S. patent pending.
The powder-coated finish creates a clean, uniform appearance while helping protect the steel from ordinary exposure and wear. Routine cleaning and inspection are still recommended, particularly after use in mud, fertilizer, coastal environments or winter road conditions.
Key Features and Benefits
- Designed for 1982โ2003 Club Car DS golf carts
- Complete driver- and passenger-side set
- Functions as both nerf bars and running-board steps
- Extra-thick steel construction
- Durable black powder-coated finish
- Integrated perforated steel step plates
- Open step design helps shed water, dirt and debris
- Adds convenient stepping surfaces for entering and exiting the cart
- Creates a rugged, finished side profile
- Vehicle-specific mounting brackets included
- Installation hardware included
- Step-by-step instructions included
- U.S. patent-pending design
- Two-year Steeleng factory warranty
- SGC part number NBDS02
Club Car DS Fitment
Steeleng lists NBDS02 for:
- Club Car DS
- 1982โ2003 model years
- Driver and passenger sides
These nerf bars are not universal. Do not assume compatibility with:
- 2004โ2013 Club Car DS carts
- Club Car Precedent
- Club Car Tempo
- Club Car Onward
- Club Car Carryall or utility vehicles
- Other golf-cart brands or platforms
The later 2004โ2013 Club Car DS uses the separate NBDS01 Nerf Bar and Running Board Set.
If the cartโs model year is unknown, locate and verify its manufacturer identification before ordering. Replacement bodies and modified trim can make visual identification unreliable. Still not sure? Give us a call, we’re happy to help!
What Is Included?
- One driver-side nerf bar with integrated step plate
- One passenger-side nerf bar with integrated step plate
- Vehicle-specific mounting-bracket assemblies
- Manufacturer-supplied installation hardware
- Step-by-step installation instructions
The golf cart and any additional accessories are sold separately.
Installation Notes
Read the supplied instructions completely and identify every bar, bracket and fastener before beginning installation.
General installation preparation should include:
- Park the cart on a firm, level surface.
- Turn the key off and engage the parking brake.
- Inspect both nerf bars, brackets and supplied hardware.
- Separate the driver- and passenger-side components.
- Identify the correct frame mounting locations.
- Loosely install the brackets before final tightening.
- Position both running boards evenly along the cart.
- Check clearance around the body, floor, suspension and tires.
- Tighten the hardware evenly according to the supplied instructions.
- Confirm that both step surfaces are secure before use.
- Reinspect the mounting hardware after the first several trips.
Professional installation is recommended if the installer is unfamiliar with Club Car DS frames, underbody mounting points or accessory alignment.
Accessory-Clearance Considerations
Inspect the cart for other accessories that could interfere with the nerf bars or mounting structures, including:
- Full floor covers
- Replacement floor mats
- Diamond-plate floor inserts
- Kick plates or rocker trim
- Fender flares
- Custom body panels
- Lift-kit components
- Brake cables
- Battery cables
- Underbody wiring
- Rear-seat mounting structures
- Underbody storage or enclosures
Some accessory combinations may require adjustment. Test-fit all components before drilling, trimming or permanently modifying another accessory.
Important Use and Safety Information
These nerf bars provide a step surface and light-duty side protection, but they are not structural safety equipment.
Do not use the nerf bars as a:
- Jacking or lifting point
- Tow or recovery point
- Trailer tie-down location
- Vehicle pushing point
- Support point while working beneath the cart
- Mounting location for seats or passenger restraints
Always step on the intended perforated running-board area rather than unsupported tubing or mounting brackets.
Do not use the steps if any bracket, weld or fastener appears loose, bent, cracked or damaged.
Choose the Correct DS Generation
Club Car DS products frequently use different fitment breaks depending on the component.
For these nerf bars:
- 1982โ2003 Club Car DS: Use NBDS02
- 2004โ2013 Club Car DS: Use NBDS01
Do not select the nerf bars based only on a windshield, body panel or other previously installed accessory. Confirm the cartโs actual model year.
Complete Your Early Club Car DS Build
Pair these nerf bars with model-appropriate Club Car DS accessories:
- Club Car DS Basic LED Light Kit โ LIDS01
Add model-specific headlights and taillights. - Club Car DS Deluxe LED Light Kit Bundle โ BNDL-LIDS01-LIDX02
Interlink for customers who also need turn signals, horn, brake-light functionality and the applicable deluxe harness. - Club Car DS OEM-Style Rubber Full Floor Cover โ FCDS01
Replace an aged full floor covering with a model-specific rubber component. - Club Car DS Rubber Floor Mat โ FCDS02
Add practical passenger-area coverage. - Club Car DS Polished Aluminum Diamond-Plate Floor Mat โ FCDS03
Continue the utility-inspired appearance through the footwell. - Club Car DS Polished Aluminum Diamond-Plate Kick Plate โ KPDS01
Add a bright diamond-plate accent near the lower body. - Club Car DS Black Powder-Coated Diamond-Plate Kick Plate โ KPDS02
Coordinate the lower body with the nerf barsโ black finish. - Club Car DS Black Powder-Coated Front Bumper Cover โ FBDS01
- Club Car DS Polished Diamond-Plate Front Bumper Cover โ FBDS02
- Club Car DS Aluminum Diamond-Plate Engine Cover
Confirm the fitment and installation sequence when combining the nerf bars with floor coverings, kick plates or other accessories mounted near the rocker and floor areas.
Club Car DS Windshield Interlinks
The nerf bars cover a broader year range than the Club Car DS windshields. Direct customers to the correct windshield generation:
For 1982โ2000.5 Club Car DS
- Club Car DS Tinted Folding Windshield โ WSDS01
- Club Car DS MOAB Vented Tinted Windshield โ WSDS09
- Club Car DS MOAB DOT-Approved Clear Windshield โ WSDS11
For 2000.5โ2003 Club Car DS
- Club Car DS Tinted Folding Windshield โ WSDS02
- Club Car DS MOAB Vented Tinted Windshield โ WSDS10
- Club Car DS MOAB DOT-Approved Clear Windshield โ WSDS12
Always verify the cartโs windshield generation independently. The windshield fitment break does not change the stated 1982โ2003 fitment of NBDS02.
Street-Legal Build Note
Nerf bars do not make a golf cart street legal.
Depending on local regulations, a street-operated golf cart or low-speed vehicle may require:
- Headlights and taillights
- Brake lights
- Turn signals
- Reflectors
- Mirrors
- Horn
- Seat belts
- A compliant windshield
- Vehicle registration or inspection
Equipment requirements vary by city, county and state. Installing individual accessories does not guarantee legal road use.
Cleaning and Maintenance
Wash the nerf bars with mild soap, water and a soft brush or cloth.
Pay particular attention to the perforated step plates, mounting brackets and areas where dirt can collect around the tubular frame.
Avoid abrasive pads, aggressive compounds and harsh solvents that could damage the powder-coated finish.
Periodically:
- Inspect every mounting fastener
- Check the brackets and welded joints
- Look for bent or damaged components
- Remove packed mud and debris
- Address deep scratches or chipped coating
- Confirm that both step surfaces remain stable
Inspect the entire assembly after transporting the cart, operating on rough terrain or striking an obstacle.
Product Specifications
- Product type: Nerf bars / running boards
- Brand: SGC / Steeleng
- Manufacturer part number: NBDS02
- Vehicle make: Club Car
- Compatible model: DS
- Model years: 1982โ2003
- Quantity: Two
- Installation sides: Driver and passenger
- Material: Extra-thick steel
- Finish: Black powder coat
- Step style: Integrated perforated steel plate
- Mounting brackets: Included
- Installation hardware: Included
- Installation instructions: Included
- Manufacturer warranty: Two years
- Design status: U.S. patent pending
- Fit type: Vehicle-specific
- Universal fit: No
Frequently Asked Questions
How many nerf bars are included?
NBDS02 is sold as a set of two. It includes one driver-side bar and one passenger-side bar.
Which Club Car DS years does NBDS02 fit?
Steeleng lists NBDS02 for 1982โ2003 Club Car DS golf carts.
Will these fit a 2004 or newer Club Car DS?
No. The 2004โ2013 Club Car DS uses the separate NBDS01 nerf-bar kit.
Will NBDS02 fit a Club Car Precedent, Tempo or Onward?
No. Those carts use different frames and mounting configurations. Select running boards specifically listed for the cartโs exact platform.
Does fitment change at the 2000.5 body-style split?
Steeleng lists this nerf-bar kit for the complete 1982โ2003 range. Other accessoriesโparticularly windshieldsโuse a 2000.5 fitment break and must be selected separately.
Are these nerf bars or running boards?
They serve both purposes. The tubular frames provide nerf-bar styling, while the perforated plates create stepping surfaces.
Are the mounting brackets and hardware included?
Yes. Steeleng states that the brackets, mounting hardware and step-by-step instructions are included.
Are the steps aluminum?
No. Steeleng describes the kit as extra-thick steel with a black powder-coated finish.
Does the manufacturer specify separate gas and electric versions?
The current Steeleng listing identifies fitment by Club Car DS model and year range rather than listing separate powertrain versions. Modified and nonstandard carts should be verified before ordering.
Can the bars be used as jack points?
No. Do not lift or support the golf cart using the nerf bars.
Will they work with a floor mat or full floor cover?
Compatibility depends on the floor product and how it mounts. Test-fit the nerf-bar brackets and floor covering before permanently modifying either product.
Will they interfere with a rear seat?
Compatibility depends on the rear-seat frame and mounting system. Inspect the available underbody clearance before installation.
Do the nerf bars make the golf cart street legal?
No. They are exterior step accessories and are not street-legal equipment.
