Description
Rugged Side Steps for 1996โ2021 EZGO TXT Golf Carts
The SGC NBTX01 Nerf Bar Kit adds a substantial, utility-inspired profile to compatible EZGO TXT golf carts while providing a dedicated stepping surface on both sides of the vehicle.
These are more than decorative side tubes. Each nerf bar incorporates a wide perforated steel step plate within its tubular frame. The openings provide surface texture and allow water, dirt and loose debris to pass through rather than collect on a completely solid platform.
The black running boards complement lifted TXT builds, hunting carts, utility vehicles, neighborhood cruisers and customized golf carts. Their finish also coordinates naturally with black brush guards, roofs, wheels, rear-seat frames and other dark exterior accessories.
Extra-Thick Powder-Coated Steel Construction
Steeleng manufactures NBTX01 from extra-thick steel with a black powder-coated finish.
The complete assembly combines:
- Tubular outer rails
- Integrated perforated steel step plates
- TXT-specific rectangular mounting structures
- Welded mounting tabs
- Manufacturer-supplied brackets and hardware
The powder-coated finish creates a clean, consistent appearance while helping protect the steel from ordinary exposure and wear. Routine cleaning and inspection remain important, especially after trail use or exposure to mud, fertilizer, coastal air or winter road residue.
Steeleng identifies the design as U.S. patent pending.
Key Features and Benefits
- Designed for 1996โ2021 EZGO TXT golf carts
- Complete driver- and passenger-side set
- Functions as both nerf bars and running-board steps
- Extra-thick steel construction
- Durable black powder-coated finish
- Integrated perforated steel step plates
- Open step design helps shed water, dirt and loose debris
- Provides a dedicated stepping surface on both sides
- Adds a rugged, finished appearance to the cart
- TXT-specific mounting structures included
- Mounting brackets included
- Installation hardware included
- Step-by-step instructions included
- U.S. patent-pending design
- Two-year Steeleng factory warranty
- SGC part number NBTX01
Vehicle Fitment
Steeleng lists NBTX01 for:
- 1996โ2021 EZGO TXT golf carts
- Driver and passenger sides
The manufacturer identifies fitment by model and year range without publishing separate gas and electric versions.
These nerf bars are not universal.
Do not assume compatibility with:
- Pre-1996 EZGO TXT carts
- 2022-up EZGO TXT carts
- EZGO RXV
- EZGO Marathon
- EZGO ST or Workhorse
- EZGO Express models
- Club Car golf carts
- Yamaha golf carts
- Custom chassis without factory-style TXT mounting locations
The TXT platform received body, electrical and accessory changes throughout this long fitment range. Confirm the cartโs model and year before ordering.
Replacement bodies and custom trim can make visual identification unreliable. Check the manufacturer identification label or serial-number information when the exact model is uncertain.
What Is Included?
- One driver-side nerf bar with integrated step plate
- One passenger-side nerf bar with integrated step plate
- Two TXT-specific mounting structures
- Manufacturer-supplied mounting brackets
- Installation fasteners
- Step-by-step installation instructions
The golf cart and any additional accessories shown or mentioned are sold separately.
Installation Notes
Read the supplied instructions completely and identify every bar, bracket and fastener before beginning installation.
General installation preparation should include:
- Park the cart on a firm, level surface.
- Turn the key off and engage the parking brake.
- Disconnect the battery system according to the cart manufacturerโs service procedure when working near electrical cables.
- Inspect both nerf bars, mounting structures and all supplied hardware.
- Separate the driver- and passenger-side components.
- Identify the correct TXT chassis mounting locations.
- Loosely install the mounting structures and brackets before final tightening.
- Position both running boards evenly along the sides of the cart.
- Check clearance around the body, floor, suspension, wiring, brake cables and tires.
- Tighten the mounting hardware evenly according to the supplied instructions.
- Confirm that both step surfaces are secure and stable before use.
- Reinspect all mounting hardware after the first several trips.
Professional installation is recommended if the installer is unfamiliar with EZGO TXT frames, underbody mounting points or accessory alignment.
Never work beneath a cart that is supported only by a jack. Use properly rated lifting and support equipment whenever underbody access is required.
Accessory-Clearance Considerations
Inspect the cart for accessories or modifications that could interfere with the running boards or mounting structures, including:
- Full floor covers
- Replacement rubber floor mats
- Diamond-plate floor inserts
- Diamond-plate kick plates
- Rocker trim
- Fender flares
- Custom body panels
- Lift-kit components
- Oversized wheels and tires
- Battery cables or electrical wiring
- Brake cables
- Rear-seat mounting structures
- Underbody storage
- Custom side panels or enclosures
Some accessory combinations may require adjustment. Test-fit the nerf bars and all nearby components before drilling, trimming or permanently modifying another accessory.
Important Use and Safety Information
These nerf bars provide stepping surfaces and added exterior coverage, but they are not structural safety equipment.
Do not use them as a:
- Jacking or lifting point
- Tow or recovery point
- Winch attachment point
- Trailer tie-down location
- Vehicle pushing point
- Support point while working beneath the cart
- Mounting location for seats or passenger restraints
Always step on the intended perforated running-board surface rather than unsupported tubing or mounting brackets.
Do not use the steps if any bracket, weld, fastener or mounting structure appears loose, bent, cracked or damaged.
The manufacturer does not publish a load rating on the current product page. Do not advertise or assume a specific weight capacity unless Steeleng supplies written documentation.
TXT Generation and Accessory Fitment Note
NBTX01 spans both major portions of the listed TXT range:
- 1996โ2013 TXT
- 2014โ2021 TXT
Other accessories are not necessarily interchangeable across that entire period.
When selecting windshields, brush guards, light kits, body components or street-legal equipment, use the product specifically listed for the cartโs model year.
For example:
- 1996โ2013 and 2014-up TXT carts use different basic light kits.
- Early and late TXT carts use different windshield applications.
- Steeleng offers separate brush guards for 1996โ2013 and 2014-up carts.
- Some later accessories may also list Freedom or Valor, but that does not automatically expand NBTX01 fitment beyond the manufacturerโs stated TXT application.
Do not use the broad 1996โ2021 fitment of these running boards to assume that every related TXT accessory fits the same year range.
Complete Your EZGO TXT Build
1994โ2013 TXT Windshields
- EZGO TXT Tinted Folding Windshield | 1994-2013 | SGC โ WSTX01
Add folding wind, dust and light-debris coverage to an earlier TXT. - EZGO TXT MOAB Vented Tinted Windshield | 1994-2013 | SGC โ WSTX09
Add adjustable airflow and darker tinted coverage. - EZGO TXT MOAB DOT-Approved Clear Folding Windshield | 1994-2013 | SGC โ WSTX11
A clear, DOT-marked option for compatible street-oriented builds.
2014-Up TXT, Freedom and Valor Windshields
- EZGO TXT, Freedom & Valor Tinted Folding Windshield | 2014-Up | SGC โ WSTX02
- EZGO TXT MOAB Vented Tinted Windshield | 2014-Up | SGC โ WSTX10
- EZGO TXT MOAB DOT-Approved Clear Folding Windshield | 2014-Up | SGC โ WSTX12
TXT Lighting
- EZGO TXT Basic LED Light Kit | 1996-2013 | SGC โ LITX01
- EZGO TXT Deluxe LED Light Kit Bundle | 1996-2013 | SGC โ BNDL-LITX01-LIDX02
- EZGO TXT Freedom Basic LED Light Kit | 2014-Up | SGC โ LITX02
- EZGO TXT Deluxe LED Light Kit Bundle | 2014-Up | SGC โ BNDL-LITX02-LIDX02
Confirm the cartโs year and electrical configuration before selecting a light kit.
TXT Floor and Diamond-Plate Accessories
- EZGO TXT OEM-Style Rubber Full Floor Cover | SGC โ FCTX01
- EZGO TXT Rubber Floor Mat | SGC โ FCTX02
- EZGO TXT Polished Aluminum Diamond-Plate Floor Mat | SGC โ FCTX03
- EZGO TXT Polished Aluminum Diamond-Plate Kick Plate | SGC โ KPTX01
- EZGO TXT Black Powder-Coated Aluminum Diamond-Plate Kick Plate | SGC โ KPTX02
- EZGO TXT Aluminum Diamond-Plate Front Shock Cover | SGC โ FSTX01
Test-fit floor products, kick plates and nerf-bar mounting components before permanently modifying any accessory.
TXT Brush Guards
For 1996โ2013 carts:
- EZGO TXT Black Powder-Coated Brush Guard | 1996-2013 | SGC โ BGTX01
- EZGO TXT Polished Stainless Steel Brush Guard | 1996-2013 | SGC โ BGTX02
For 2014-up carts:
- EZGO TXT, Freedom & Valor Polished Stainless Steel Brush Guard | 2014-Up | SGC โ BGTX03
- EZGO TXT, Freedom & Valor Black Powder-Coated Brush Guard | 2014-Up | SGC โ BGTX04
Select the brush guard by the cartโs actual model year. Broad NBTX01 running-board fitment does not make early and late brush guards interchangeable.
Street-Legal Build Note
Nerf bars do not make an EZGO TXT street legal.
Depending on local regulations, a street-operated golf cart or low-speed vehicle may require:
- Headlights and taillights
- Brake lights
- Turn signals
- Reflectors
- Mirrors
- Horn
- Seat belts
- A compliant windshield
- Vehicle registration or inspection
Always confirm the rules for the city, county and state where the cart will be operated. Installing individual accessories does not guarantee legal road use.
Cleaning and Maintenance
Wash the nerf bars with mild soap, water and a soft brush or cloth.
Pay particular attention to the perforated step plates, mounting structures and areas where dirt can collect around the tubular frames.
Avoid abrasive pads, harsh solvents and aggressive compounds that could damage the powder-coated finish.
Periodically:
- Inspect every mounting fastener
- Check the mounting structures and brackets
- Inspect welded joints
- Look for bent or damaged components
- Remove packed mud and debris
- Address deep scratches or chipped coating
- Confirm that both step surfaces remain stable
Inspect the complete assembly after transporting the cart, operating on rough terrain or striking an obstacle.
Product Specifications
- Product type: Nerf bars / running boards
- Brand: SGC / Steeleng
- Manufacturer part number: NBTX01
- Vehicle make: EZGO
- Compatible model: TXT
- Model years: 1996โ2021
- Quantity: Two
- Installation sides: Driver and passenger
- Material: Extra-thick steel
- Finish: Black powder coat
- Step style: Integrated perforated steel plate
- Mounting structures: Included
- Mounting brackets: Included
- Installation hardware: Included
- Installation instructions: Included
- Manufacturer warranty: Two years
- Design status: U.S. patent pending
- Fit type: Vehicle-specific
- Universal fit: No
Frequently Asked Questions
How many nerf bars are included?
NBTX01 is sold as a set of two. It includes one driver-side running board and one passenger-side running board.
Which golf carts does NBTX01 fit?
Steeleng lists NBTX01 for 1996โ2021 EZGO TXT golf carts.
Will NBTX01 fit a 2014-up TXT?
Yes. The manufacturerโs published fitment extends through the 2021 model year.
Will NBTX01 fit a 2022 or newer TXT?
The current Steeleng listing ends at 2021. Compatibility with 2022-up carts should not be assumed without written manufacturer confirmation.
Does Steeleng specify separate gas and electric versions?
No separate gas and electric versions are identified on the current manufacturer listing. Modified and nonstandard carts should still be inspected for mounting and accessory clearance.
Will these running boards fit an EZGO RXV?
No. The RXV uses different chassis mounting structures and requires an RXV-specific running-board kit.
Are these nerf bars or running boards?
They serve both purposes. The tubular frames provide nerf-bar styling, while the integrated perforated plates create running-board step surfaces.
Are the mounting brackets and hardware included?
Yes. Steeleng states that the brackets, installation hardware and step-by-step instructions are included.
Are the running boards made from aluminum?
No. Steeleng describes the kit as extra-thick steel with a black powder-coated finish.
Can the running boards be used as jack points?
No. Never lift or support the cart using the nerf bars or running boards.
Will they work with a TXT floor cover or floor mat?
Compatibility depends on the floor product and its mounting method. Test-fit the nerf-bar mounting components and floor covering before permanently modifying either accessory.
Will they interfere with a rear seat?
Compatibility depends on the rear-seat frame and mounting structure. Inspect the underbody mounting points and available clearance before installation.
Can these running boards be installed on a lifted TXT?
A lift kit does not automatically prevent installation, but clearance around the lift components, suspension, tires and mounting structures must be checked before final tightening.
Is a published weight capacity available?
The current Steeleng listing does not publish a load rating. Do not assume a specific weight capacity.
Do the nerf bars make the cart street legal?
No. Nerf bars are exterior step accessories and are not street-legal equipment.
