Description
EZGO RXV 6″ Heavy-Duty Coil-Over A-Arm Lift Kit
Transform your gas or electric EZGO RXV with a heavy-duty front suspension upgrade, approximately six inches of lift, and clearance for larger tires using the SGC LKRX05 Coil-Over A-Arm Lift Kit. Designed for 2008 and newer EZGO RXV golf carts, this complete front-and-rear lift system replaces the stock front axle configuration with a patented heavy-duty A-arm suspension featuring built-in coil-over shocks.
Whether you are customizing a neighborhood cruiser, campground cart, recreational vehicle, or utility-focused RXV, the LKRX05 provides a substantial suspension foundation for a lifted wheel and tire package.
Fits Gas and Electric EZGO RXV Models
The SGC LKRX05 is designed for:
- 2008 and newer EZGO RXV golf carts
- Gas-powered models
- Electric models
- Factory-style chassis and suspension configurations
Important: Confirm your golf cart is an EZGO RXV and verify its production year before ordering. This kit is not intended for EZGO TXT, Medalist, Marathon, or Workhorse models.
Heavy-Duty A-Arm Suspension Design
The LKRX05 replaces the stock front axle configuration with a heavy-duty A-arm suspension system. The purpose-built A-arm components establish the lifted front suspension geometry while providing secure mounting points for the included coil-over shocks.
Rear lift components are included to raise the back of the cart and create a consistent lifted stance from front to rear.
Built-In Coil-Over Shocks
Integrated coil-over shocks combine the spring and shock functions into a compact front suspension assembly. Each coil-over supports and controls movement on its side of the front suspension.
This configuration provides a more substantial front suspension conversion than a traditional block or spindle-extension lift.
Patented SGC Suspension Design
The LKRX05 features Steeleng’s patented A-arm suspension design under U.S. Patent No. 10,343,476.
Heavy-duty steel components feature a durable black powder-coated finish for corrosion resistance and a clean, coordinated appearance.
Clearance for Tires Up to 23 Inches
This 6-inch EZGO RXV lift kit accommodates tires up to 23 inches tall when paired with properly offset wheels.
Actual tire clearance may vary based on wheel width, wheel offset, tire profile, suspension setup, passenger load, and installed accessories. Offset wheels are required when installing larger tires with this lift kit.
Complete Front-and-Rear Lift System
The LKRX05 includes the heavy-duty front A-arm system, built-in coil-over shocks, rear suspension lift components, and required installation hardware.
Quality-tested Class 8.8 hardware provides dependable fastening strength throughout the suspension system.
Bolt-On Installation
The LKRX05 is engineered as a bolt-on suspension lift that does not normally require additional parts or permanent modification. Step-by-step installation instructions are included.
Professional installation is recommended if you are unfamiliar with golf cart steering or suspension systems. A proper front-end alignment should be completed after installation. Verify steering operation and tire clearance through the full range of motion, then inspect and retorque all mounting hardware following the initial break-in period.
Key Features
- Fits 2008 and newer EZGO RXV golf carts
- Compatible with gas and electric models
- Provides approximately 6 inches of lift
- Patented heavy-duty A-arm front suspension design
- Built-in front coil-over shocks
- Replaces the stock front axle configuration
- Includes front and rear suspension lift components
- Accommodates tires up to 23 inches tall
- Requires offset wheels for larger tire fitment
- Bolt-on installation with no permanent modification normally required
- Black powder-coated steel components
- Class 8.8 high-strength mounting hardware
- Step-by-step installation instructions included
- Four-year Steeleng factory warranty
What’s Included
- Heavy-duty front A-arm suspension components
- Built-in front coil-over shock assemblies
- Rear suspension lift components
- Required mounting brackets and spacers
- Class 8.8 installation hardware
- Step-by-step installation instructions
Product Specifications
| Specification | Details |
|---|---|
| Manufacturer | SGC / Steeleng |
| Current Manufacturer Part Number | LKRX05 |
| Legacy Part Numbers to Review | LKRX02 and LKRX04 |
| Golf Cart Make | EZGO |
| Golf Cart Model | RXV |
| Model Years | 2008 and newer |
| Powertrain | Gas or electric |
| Lift Height | Approximately 6 inches |
| Lift Type | Heavy-duty coil-over A-arm lift kit |
| Front Suspension | A-arm system with built-in coil-over shocks |
| Maximum Tire Size | Up to 23 inches |
| Wheel Requirement | Offset wheels required |
| Finish | Black powder coat |
| Patent | U.S. Patent No. 10,343,476 |
| Warranty | Four-year Steeleng factory warranty |
Why Buy from Pete’s Golf Carts?
At Pete’s Golf Carts, we know that choosing the correct lift kit is just as important as the installation itself. Our team carefully reviews product fitment and specifications to help you find the right components for your golf cart. When you purchase from Pete’s, you receive dependable products, knowledgeable support, and real-world golf cart experience from a team that is here to help before and after the sale.
