Description
Restore Full-Floor Protection in Your Club Car DS
A cracked, worn or missing factory floor mat can leave your Club Car DS looking unfinished and make the floor more difficult to maintain. The SGC OEM-Style Rubber Full Floor Cover provides a model-specific replacement for 1982-2013 Club Car DS golf carts.
Unlike a small step-area mat, FCDS01 replaces the original full factory floor covering. Its black rubber construction restores a clean, factory-inspired appearance while covering the cartโs primary floor and stepping areas.
OEM-Style Replacementโnot a Universal Overlay
FCDS01 is an aftermarket SGC replacement designed around the Club Car DS floor layout. It is not a generic rectangular mat that must be cut to shape.
The necessary openings are pre-made, eliminating the need to measure and cut the rubber during a normal installation. No separate mounting hardware is required.
This is an OEM-style aftermarket replacement and is not represented as a genuine Club Car OEM component.
Easy-to-Clean Black Rubber Construction
The black rubber surface is made for the dirt, grass clippings, dust and routine foot traffic encountered during everyday golf-cart use.
Steeleng identifies the material as UV protected and easy to wash, making it a practical choice for carts used around neighborhoods, campgrounds, properties, golf courses and recreational areas.
Key Features and Benefits
- Replaces the original Club Car DS factory floor mat
- Full-floor replacement rather than a step-area-only mat
- Designed for 1982-2013 Club Car DS golf carts
- High-quality black rubber construction
- Factory-style appearance
- Pre-made openings simplify installation
- No mounting hardware required
- Easy-to-wash surface
- Manufacturer-stated UV protection
- Backed by Steelengโs one-year factory warranty
Club Car DS Fitment
FCDS01 fits:
- Club Car DS
- 1982-2013 model years
This floor cover is not listed for:
- Club Car Precedent
- Club Car Tempo
- Club Car Onward
- EZGO models
- Yamaha models
Confirm that your cart is a Club Car DS before ordering. Model year and body style matter when selecting a full replacement floor covering.
Full Floor Cover or Lower Step Mat?
SGC offers two different rubber floor products for the 1982-2013 Club Car DS:
FCDS01 โ OEM-Style Full Floor Cover
Choose FCDS01 when you want to replace the original factory floor mat across the full floor area.
FCDS02 โ Lower Stepping-Area Mat
Choose FCDS02 when you need rubber coverage specifically over the lower stepping area rather than a complete replacement for the factory floor covering.
Link the FCDS02 listing here once it is live so customers can compare the two coverage styles before ordering.
Other Club Car DS Floor Options
Customers wanting a more aggressive tread design can compare the Tire Treads Golf Cart Floor Mat for Club Car DS and other popular models.
For a bright custom-metal appearance, link the FCDS03 Club Car DS polished aluminum diamond-plate floor mat here once that listing is live.
Complete the lower-body upgrade with a compatible Club Car DS aluminum diamond-plate kick plate.
Whatโs Included
- One black OEM-style rubber full floor cover
Mounting hardware is not included because Steeleng states that no hardware is required.
Installation Notes
Before installation:
- Confirm that the cart is a 1982-2013 Club Car DS
- Remove the existing factory floor covering
- Clean dirt and debris from the underlying floor
- Inspect the floor for damage before covering it
- Unroll and relax the replacement cover if it was packaged tightly
- Align the pre-made openings with the cartโs corresponding floor features
- Confirm that the cover lies flat and does not interfere with the pedals
Do not trim the mat until fitment and orientation have been checked carefully. The required openings are supplied pre-made by the manufacturer.
After installation, verify that the accelerator and brake pedals move through their complete range without contacting the floor cover.
Cleaning and Care
For routine cleaning:
- Remove loose dirt and debris
- Rinse with clean water
- Use mild soap when needed
- Wipe or scrub with a soft brush
- Rinse away all soap residue
- Allow the floor cover to dry
- Avoid petroleum-based chemicals and harsh solvents
- Periodically confirm that the cover remains properly positioned
Product Specifications
- Brand: SGC
- Manufacturer: Steeleng
- Manufacturer Part Number: FCDS01
- Product Type: Full replacement golf-cart floor cover
- Vehicle Make: Club Car
- Vehicle Model: DS
- Model-Year Fitment: 1982-2013
- Material: Rubber
- Color: Black
- Coverage: Full floor
- Application: Replaces the original factory floor mat
- Pre-Made Openings: Yes
- Mounting Hardware Required: No
- Washable: Yes
- UV Protection: Manufacturer stated
- Manufacturer Warranty: One year
- Quantity: One floor cover
Frequently Asked Questions
Is FCDS01 a complete floor cover?
Yes. Steeleng identifies FCDS01 as a full floor cover that replaces the original factory floor mat.
Is this a genuine Club Car OEM floor mat?
No. It is an aftermarket SGC replacement designed to provide OEM-style coverage and appearance.
Does it fit every Club Car DS?
It is listed for Club Car DS models from 1982 through 2013. It is not listed for later Club Car Precedent, Tempo or Onward models.
Are the necessary openings already made?
Yes. Steeleng states that all required holes are pre-made for easier installation.
Is mounting hardware included?
No hardware is included or required according to Steeleng.
Does this mat cover only the stepping area?
No. FCDS01 is the full replacement floor cover. Customers wanting lower-step-area coverage should consider SGC FCDS02.
Can the mat be washed?
Yes. The manufacturer describes it as easy to wash.
