Description
High Torque Electric Golf Cart Motor for 36V–48V EZGO or Yamaha Series Carts
Need more pulling power from your EZGO or Yamaha golf cart? This high torque electric golf cart motor, part number 170-004-0001, is designed for compatible 36V–48V EZGO or Yamaha Series carts using a 19-tooth female/internal spline.
This motor is a strong option when your cart needs more low-end torque rather than more top-end speed. It is designed to provide approximately 40% more torque than a stock motor, making it a better fit for heavier carts, light utility use, mild hills, rear seats, cargo loads, and slower-speed applications where pulling power matters most.
Best For
This motor is best suited for:
- Compatible 36V–48V EZGO Series carts
- Compatible 36V–48V Yamaha Series carts
- Carts using a 19-tooth female/internal spline motor
- Customers wanting more torque instead of more speed
- Rear seat carts, light utility carts, and heavier everyday-use setups
- Mostly stock or mildly upgraded carts with healthy batteries
- Applications where low-end pulling power is the priority
This is not the best option if your main goal is maximum top speed. For speed-focused carts, a high-speed motor may be a better choice.
Performance Expectations
This is a high torque motor designed to improve pulling power compared to standard factory performance.
Expected performance:
- Approximate top speed: 12 MPH
- Performance style: Torque-focused
- Torque enhancement: Approx. 40% over stock
- HP: Approx. 8.0 HP
- Electrical rating: 36V / 275 amps or 48V / 225 amps
- Spline: 19-tooth female/internal
- Spline pitch: 24/48
Actual performance can vary based on battery condition, controller setup, tire size, tire pressure, terrain, passenger weight, gear ratio, and overall cart condition. Standard factory speeds are typically around 10–15 MPH, and listed performance is based on a standard factory gear ratio.
Fits
Designed for compatible:
- 36V EZGO electric golf carts
- 48V EZGO electric golf carts
- 36V Yamaha electric golf carts
- 48V Yamaha electric golf carts
- Series motor applications
- Carts using a 19-tooth female/internal spline
- Carts using a 24/48 spline pitch
Important Fitment Notes
This motor does not fit every EZGO or Yamaha electric cart. Before ordering, confirm your cart uses a compatible Series motor setup and the correct 19-tooth female/internal spline.
If you are unsure whether your cart is Series, Regen, PDS, DCS, AC, or another electrical configuration, please confirm before ordering.
Key Features
- High torque performance motor
- Designed for compatible 36V–48V EZGO or Yamaha Series carts
- Approx. 40% more torque than stock
- Best for pulling power, heavier carts, and utility-style use
- 19-tooth female/internal spline
- 24/48 spline pitch
- Class H insulation / thermal rating
- Made in the USA
- Approximate motor weight: 57 lbs
- Direct OEM-style upgrade replacement for compatible applications
- No controller programming required for typical compatible installs, according to the current listing
Technical Details
- Manufacturer: D&D Motor Systems
- Part Number: 170-004-0001
- Recommended Application: 36V–48V EZGO or Yamaha Series carts
- Performance Type: High Torque
- Approximate Top Speed: 12 MPH
- Torque Enhancement: Approx. 40%
- HP: Approx. 8.0 HP
- Current Rating: 36V / 275 amps or 48V / 225 amps
- Insulation Rating: Class H
- Spline Type: Internal / female spline
- Spline Count: 19-tooth
- Spline Pitch: 24/48
- Motor Weight: Approximately 57 lbs
- Performance Spec: 6 / K-254
- Terminals: A1, A2, S1, S2
- Terminal Thread Size: 5/16-18 UNC
- Power Cable Securing Top Nut Torque Spec: 110 in-lbs max
- Made in: USA
Before You Order
Golf cart motor compatibility depends on more than brand and voltage. Before ordering, please verify:
- Your cart is an EZGO or Yamaha
- Your cart is a 36V or 48V electric model
- Your cart uses a Series motor system
- Your cart uses a 19-tooth female/internal spline
- Your cart uses the correct 24/48 spline pitch
- Your batteries, controller, solenoid, wiring, and cables are in good working condition
If you are not sure which motor your cart needs, contact us before ordering. Photos of your motor tag, motor spline, controller area, battery setup, and serial number can help us confirm the correct motor for your cart.
Important Performance Notes
This motor is built for torque, not speed. It is a better fit for carts that need stronger low-end pulling power than carts chasing higher top-end speed.
Choose a different setup if your cart is primarily used for:
- Maximum speed
- Street-style cruising where top speed is the main goal
- High-speed neighborhood builds
- Applications where 20+ MPH is expected
For those setups, a high-speed motor or complete motor/controller package may be a better fit.
Shipping Note
Motors typically ship within 5–10 business days from the manufacturer.
Shipping times may vary based on manufacturer availability, production schedules, and order volume.
FAQ Section
Will this motor fit my EZGO or Yamaha golf cart?
This motor is designed for compatible 36V–48V EZGO or Yamaha Series carts using a 19-tooth female/internal spline. It does not fit every EZGO or Yamaha electric cart, so please verify your motor type and spline before ordering.
Is this motor for speed or torque?
This is a high torque motor. It is designed for stronger pulling power rather than higher top-end speed.
How fast will my cart go with this motor?
The current listing notes estimated top speed around 12 MPH, depending on tire size, tire pressure, battery condition, controller setup, terrain, passenger weight, and overall cart condition.
How much more torque does this motor provide?
This motor is listed at approximately 40% more torque than stock.
What spline does this motor use?
This motor uses a 19-tooth female/internal spline with a 24/48 spline pitch.
Does this motor require controller programming?
The current listing states this is a direct OEM upgrade replacement with no controller programming required for compatible applications.
Is this motor good for high-speed builds?
No — this motor is better for torque-focused builds. For higher speed, choose a high-speed motor or a matched motor/controller package.
How long does it take to ship?
Motors typically ship within 5–10 business days from the manufacturer.
