Description
High Speed Electric Golf Cart Motor for 36V–48V Club Car DS Series Carts
Looking for more speed from your Club Car DS? This high speed electric golf cart motor, part number 170-003-0002, is designed for compatible 36V and 48V Club Car DS carts with Series motors.
This motor is built for customers who want more top-end speed from a street-style or neighborhood cruising cart. It fits the 10-tooth Club Car differential spline and is best suited for mostly flat terrain where speed matters more than heavy pulling power.
Best For
This motor is best suited for:
- 36V or 48V Club Car DS carts with Series motors
- Street-style and neighborhood cruising carts
- Mostly flat terrain
- Customers wanting more top-end speed
- Carts with healthy batteries and properly functioning electrical systems
- Builds where speed is the priority over low-end torque
This is not the best choice for hills, towing, oversized tires, heavy rear-seat loads, hunting builds, or utility use. For those applications, a high-torque motor or matched motor/controller package is usually the better recommendation.
Performance Expectations
This is a high speed performance motor for compatible Club Car DS Series carts. It is designed to increase top-end speed while giving up some torque compared to a stock motor.
Expected performance:
- Approximate top speed: 23 MPH
- Performance style: Speed-focused
- Speed enhancement: Approx. 70%
- Torque enhancement: Approx. -10%
- Motor RPM: 5100 RPM
- Peak HP: 10.1 HP
- Additional references: OEM Part #1014678, Advanced DC BT6-4002, GE 5BC49JB3071 / D377
Actual performance can vary based on battery condition, tire size, tire pressure, controller setup, terrain, passenger weight, gear ratio, and overall cart condition. Standard factory speeds are often around 12–14 MPH, so final results depend heavily on the full cart setup.
Fits
Designed for:
- 36V Club Car DS electric golf carts with Series motors
- 48V Club Car DS electric golf carts with Series motors
- Club Car DS Series carts using the 10-tooth Club Car differential spline
- ITS throttle Series applications, according to the current product details
Does Not Fit
This motor is not for Regen models.
If your Club Car has a regen-style electrical system, this is not the correct motor. Please confirm whether your cart is Series or Regen before ordering.
Key Features
- High speed performance motor
- Designed for compatible 36V–48V Club Car DS Series carts
- Approx. 23 MPH top-speed potential depending on setup
- Fits 10-tooth Club Car differential spline applications
- Great for street carts and community cruising
- Best for mostly flat terrain
- Class H insulation / thermal rating
- Made in the USA
- Approximate motor weight: 46 lbs
- Speed-focused option with reduced torque compared to stock
Technical Details
- Manufacturer: D&D Motor Systems
- Part Number: 170-003-0002
- Voltage Rating: 36V–48V
- Recommended Application: 36V–48V Club Car DS Series carts
- Performance Type: High Speed
- Approximate Top Speed: 23 MPH
- Speed Enhancement: Approx. 70%
- Torque Enhancement: Approx. -10%
- Motor RPM: 5100 RPM
- Peak HP: 10.1 HP
- Insulation Rating: Class H
- Spline Type: Internal spline
- Spline Count: 10-tooth
- Spline Length: 1.32″
- Spline Depth: 1.35″
- Motor Weight: Approximately 46 lbs
- Performance Spec: 3 / K-254 / CCW-5
- Terminals: A1, A2, S1, S2
- Terminal Thread Size: 5/16-18 UNC
- Power Cable Securing Top Nut Torque Spec: 110 in-lbs max
- Made in: USA
Before You Order
Golf cart motor compatibility depends on more than brand and voltage. Before ordering, please verify:
- Your cart is a Club Car DS
- Your cart is a 36V or 48V electric model
- Your cart uses a Series motor system
- Your cart is not a Regen model
- Your cart uses the correct 10-tooth Club Car differential spline
- Your batteries, controller, solenoid, cables, and wiring are in good working condition
If you are not sure which motor your cart needs, contact us before ordering. Photos of your motor tag, controller area, battery setup, and serial number can help us confirm the correct replacement.
Important Performance Notes
This motor is built for speed, not torque. It is a strong choice for flat-ground cruising and street-style carts, but it is not the best fit for heavy-load or hill-climbing applications.
Choose a different setup if your cart is primarily used for:
- Steep hills
- Heavy loads
- Oversized tires
- Towing
- Hunting or off-road use
- Frequent stop-and-go driving with heavy passengers
For those applications, a high-torque motor or complete motor/controller package is usually the better fit.
Shipping Note
Motors typically ship within 5–10 business days from the manufacturer.
Shipping times may vary based on manufacturer availability, production schedules, and order volume.
FAQ Section
Will this motor fit my Club Car DS golf cart?
This motor is designed for compatible 36V–48V Club Car DS carts with Series motors using the 10-tooth Club Car differential spline.
Is this motor for speed or torque?
This is a high speed motor. It is designed for top-end speed and provides approximately 10% less torque than stock.
How fast will my cart go with this motor?
The current listing notes estimated top speed around 23 MPH, depending on tire size, tire pressure, battery condition, controller setup, terrain, passenger weight, and overall cart condition.
Does this fit Club Car Regen carts?
No. This motor is not for Regen models.
What spline does this motor use?
This motor uses a 10-tooth internal spline for compatible Club Car differential applications.
Is this good for hills or oversized tires?
This motor is better for speed-focused, mostly flat-ground driving. For hills, towing, heavy loads, or oversized tires, a high-torque motor or matched motor/controller package is usually a better fit.
How long does it take to ship?
Motors typically ship within 5–10 business days from the manufacturer.
